Vision VISION-64 Betriebsanweisung PDF herunterladen (Seite 125)

Chapter 4 - The Vision Menus 125

X Position: The distance from the left home point that you want the cutter

to move.

Y Position: The distance from the top home point that you want the cutter to

move.

Undo SetXY: If this button is clicked, any offset that is previously set in the

Goto X,Y screen will be erased in the Vision Serial Controller.

Set As Home: If you click on this button, the start light will come on in the

controller. Then you press start and the table will move to the position

entered and then go back to the home position. However, this position is

now set in the controller as its offset home point.

Okay: If you click on this button, the start light will come on in the

controller. Then you press start button on the controller and the table will

move to the position entered and stay there until you press enter on the

keyboard.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 186 187

Keine Kommentare

Vision VISION-64 Betriebsanweisung Seite 125