1.5.11. Recording – Schedule
Set recording schedule for each camera. First, select the camera to set schedule, or “All”.
Recording can be set by each hour from 00 through 23 a day.
NO COLOR (Off)
“Off” means no recording. Even though user set recording frames and on in “CAMERA”, the system will not record
anything if user sets “OFF” in SCHEDULE.
YELLOW COLOR (Continuous Recording)
In continuous recording mode, the system records all the time as set by “CAMERA”.
GREEN COLOR (Motion-Detection Recording)
In this mode, the system records only when motion is detected in the motion area, and stops recording when
motion is not occurred. In addition, user can make motion recording configuration in “MOTION ALARM” of “DEVICE”
menu.
If user sets “OFF” in “MOTION ALARM” of “DEVICE” and sets “MOTION” in “SCHEDULE”, then the system will
record when motion is detected but motion alarm will not be activated.
ORANGE COLOR (Sensor-Activated Recording)
In sensor mode, the system will record when sensor is triggered only during dwell time as set in “SENSOR” of
“DEVICE” menu.
If user sets “OFF” in “SENSOR” of “DEVICE” and sets “SENSOR” in “SCHEDULE”, then the system will not record
anything even though a sensor is triggered.
SKY BLUE COLOR (Continuous + Motion Detection Recording)
The system records all the time by “continuous” as set by “CAMERA” of “RECORD” but will switch recording mode
to motion configuration as made by “MOTION ALARM” of “DEVICE” if motion is detected in motion area. The
system also will notify “motion event” message to Remote Software over the network.
If user sets “OFF” in “MOTION ALARM” of “DEVICE” and sets “CONT + MOT” in “SCHEDULE”, then the system
will record with continuous recording mode even though motion is detected in motion area.
DARK ORANGE COLOR (Continuous + Sensor-Activated Recording)
The system records all the time by “continuous” as set by “CAMERA” of “RECORD” but will switch recording mode
to sensor configuration as made by “SENSOR” of “DEVICE” if a sensor is triggered during dwell time. The system
also will notify “sensor event” message to Remote Software over the network.
If user sets “OFF” in “SENSOR” of “DEVICE” and sets “CONT + SENS” in “SCHEDULE”, then the system will
record with continuous recording mode even though a sensor is triggered.
PINK COLOR (Motion Detection + Sensor-Activated Recording)
The system does not record in normal operation but records only when motion is detected as set by “MOTION” of
“DEVICE” and a sensor is triggered as set by “SENSOR” of “DEVICE”.
If user set “OFF” in both “MOTION” of “DEVICE” and “SENSOR” of “DEVICE”, then the system will record only
when the motion is detected but will not record even though a sensor is triggered. And, the system will not notify
both motion & sensor to Remote Software.
(28 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern