Vision VHD-800 Bedienungsanleitung PDF herunterladen (Seite 27)

Q : I set a channel as “Covert” at the menu of the DVR(Device > Camera) but the channel

is displayed.

A : If the ID at Site Registration is set as “admin”, all channels are displayed even it is set as

“Covert”.

If you do not want to display the channel, you have to set ID at Site Registration with the

other user ID besides “admin”.

Q : I want to connect to the DVR which is set with DDNS.

A : 1) Input “MAC address.cctv-link.net” of the DVR on the address section of Site Registration

in RemoteManager

Ex) 001c84ffffff.cctv-link.net

2) Input “MAC address.cctv-link.net” of the DVR on the address section of Internet

Explorer.

Ex) http:// 001c84ffffff.cctv-link.net

3) Connection with Sub-domain is available and it can be set at the DVR.

Ex) RemoteManager: test.cctv-link.net, WEB: http://test.cctv-link.net

4) Connection with DYNDNS is available and it requires registration at dyndns.com,

previously. And also, it should be set at the DVR to use dyndns.

Ex) RemoteManager: yourdomainname.dyndns.com,

WEB: http://yourdomainname.dyndns.com

Q : What is the difference between “TCP Port” and “Web Port”?

A : “TCP Port” is the one for sending & receiving data between DVR and remote software.

Default is “9010” but, if you change it at DVR, you have to input the same number at remote

software when you register site.

“Web Port” is the one for approaching web server of DVR from RemoteManager. Default is

“80” but, if you change it at DVR, you have to input the same number at remote software

when you register site.

Q : I want to connect with the other user ID besides “admin”.

A : User ID in Site Registration should be one of the registered IDs in DVR.

Please register new ID and Password in DVR and connect with them.

Q : I changed playback speed in VOD mode but it doesn’t work properly.

A : 1) Image data for VOD(playback) comes from the DVR through Network. Therefore, in the

case that the network condition is not good or the specification of the PC is not good

enough, it doesn’t work properly.

2) It can be incorrect depends on the recording condition(motion recording, etc.) at the

DVR.

3) When you change the speed, there might be “Buffering”.

Q : There are lines on the image.

A : It can be shown when you playback D1 image.

When you click the right button of the mouse, you can find “De-Interlace” option.

Please check again after using this option.

Q : During VOD(playback) operation, channels is at the state of “Buffering” or the

channel which is recorded as motion detection mode playback is disconnected.

A : In order to control connection session of the DVR, remote software stops connection

automatically when there is no data transmission for a certain period(about 5~10 minutes.).

1 2 ... 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Vision VHD-800 Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Vision VHD-800